Oct . 22, 2025 16:20 Back to list

Binding Wire for Sale – High-Tensile, Rustproof, Bulk Deals

Binding Wire: an insider’s guide to buying hot-dip galvanized tying wire that actually lasts

If you’ve been hunting for Binding Wire For Sale, a quick heads-up from the field: there’s more to it than price-per-kilo. Coating mass, draw quality, anneal curve, and—crucially—how the zinc layer survives abrasion on site. I’ve walked enough job sites to know that a smooth-unwinding coil can save hours. And yes, customers do notice.

What it is and how it’s made

This Binding Wire is hot-dip galvanized wire produced from high-quality low-carbon steel (with options in higher carbon grades for higher tensile needs). Process flow, in plain terms:

Materials: low-carbon steel wire rod (typ. 0.06–0.12% C); optional high-carbon for extra strength.
Methods: drawing → pickling & rust removal → high-temperature annealing → hot-dip galvanizing → controlled cooling.
Hot-dip detail: immersion in molten zinc for a thicker, robust coating; fast production, heavy coating compared to electro-galv.
Testing: tensile per ASTM A370; zinc coating per EN 10244-2/ASTM A641; coating mass via ISO 7989; corrosion checks via ASTM B117 salt spray.

Specs at a glance

Parameter	Typical Range (≈, real-world use may vary)	Notes/Standards
Diameter	0.8–2.0 mm (custom up to 4.0 mm)	Common tying sizes: 1.0–1.6 mm
Tensile strength	350–550 MPa (low C) / 700–1100 MPa (high C)	ASTM A370 test
Zinc coating mass	≈ 50–275 g/m²	ASTM A641, EN 10244-2
Elongation	≥ 10–20%	Depends on anneal curve
Coil weight	1–50 kg (spool/bundle)	Plastic-wrapped or paper-wrapped
Service life	5–15 yrs outdoors; 10–25 yrs mild environments	ISO 9223 environment dependent

Use cases and advantages

Construction rebar tying, fencing, vineyard trellis, packaging bales, gabion lacing, HVAC duct hangers—this wire earns its keep. The hot-dip layer resists abrasion and white rust better than electro-galv. Many customers say the unwind is “shockingly smooth,” which I’ll admit is a small joy on a busy pour day. In short: predictable tie strength, fewer snags, less waste.

Vendor snapshot (and honest comparison)

Manufacturer origin: Business building, Tongxiang, Shijiazhuang City, Hebei Province. Fast line speeds, thick coatings, and—importantly—repeatable annealing.

Vendor	Coating	Lead Time	MOQ	Cert/QA
Yiszhe Wire Mesh	Hot-dip, 50–275 g/m²	7–15 days	≈ 1–5 tons	ISO 9001; mill test reports; salt-spray data
Regional Trader A	Mixed (electro/HDG)	Stock-dependent	Flexible	Basic COA, limited traceability
Local Reseller	Varies by batch	Immediate (small)	By coil	Spot checks only

Customization options

Gauge: 0.8–4.0 mm; soft/medium/hard temper.
Coating: targeted zinc mass for coastal or inland sites.
Packaging: 1–50 kg coils, color-coded ties, private labels.

Real-world cases

Case 1: Rebar contractor (humid Gulf site) switched to thicker-coat class; salt-spray to 240 h (ASTM B117) showed no red rust—tie waste fell ≈12%.

Case 2: Vineyard in a coastal valley used 1.4 mm low-C soft temper; workers said coil memory was “manageable,” and seasonal corrosion dropped noticeably.

Quality notes

Certifications: ISO 9001; RoHS/REACH statements available.
Typical test data: tensile 420–500 MPa (low C), elongation ≥ 15%, zinc mass 90–180 g/m²; NSS 120–240 h baseline.
Industries served: construction, agriculture, logistics, energy, OEM fab shops.

Bottom line: if you need Binding Wire For Sale with consistent tie performance, check the anneal and coating class first. And if you’re price-checking Binding Wire For Sale across vendors, make sure test methods match—apples to apples, or the data gets cheeky.

Citations

Binding Wire for Sale – High-Tensile Galvanized, Bulk Supply